Permit-ready drafting for Saratoga ADUs, additions, remodels and new homes — drawn to fit Saratoga's zoning, hillside and design review requirements.
Saratoga is one of the more design-conscious cities in Santa Clara County. Lots tend to run larger than in neighboring cities, a meaningful share of the hillside terrain in and around town comes with its own slope, grading and setback considerations, and the city's design standards for single-family homes are generally stricter than what you'll find in denser neighboring cities. That combination means plan check reviewers pay close attention to massing, height and how a project sits on its lot, not just floor area. Plans drawn without those constraints in mind — especially anything on a hillside or larger parcel — tend to trigger extra design review scrutiny and correction cycles that a plan drawn against Saratoga's own standards from the start would avoid.
Detached, attached and junior ADU plans sized and sited to Saratoga's setback, height and lot-coverage rules, with the state ADU allowances applied correctly.
Room and second-story addition drawings coordinated with Saratoga's height, design review and hillside standards where they apply.
Interior and exterior remodel drawings for kitchens, baths and whole-house renovations, including scope that triggers a full plan check submittal.
Ground-up custom home drawings and garage-to-living-space conversions prepared for Saratoga's submittal and design review process.
We review your lot, existing structure and goals, and confirm zoning and, where relevant, hillside constraints specific to your Saratoga parcel.
Full construction drawing set — site plan, floor plans, elevations, sections and details — prepared to Saratoga's submittal checklist.
Energy compliance and, where needed, structural review coordinated into the same submittal package.
If the city comes back with corrections, we revise and resubmit — we don't disappear after the first drawing set goes out.
Two decades drawing plans for Saratoga and the surrounding cities, not a generic national template.
Drawings prepared under professional design standards, not just CAD line work — important in a city that reviews design closely.
Saratoga's zoning, hillside and design review standards get updated — we draw against the current standard, not last year's.
You work directly with the person drawing your plans, from first sketch through plan check corrections.
Based in San Jose, working throughout Santa Clara, San Mateo and Alameda counties and the wider Bay Area.
It depends on the project. Many single-family ADUs, additions and remodels in Saratoga can be permitted with drafted plans alone, but structural elements — retaining walls, hillside foundations, second-story additions — often require a licensed engineer's stamp, and hillside lots trigger that requirement more often than flat ones. We'll tell you upfront whether your project needs one, and can coordinate engineering review as part of the drawing package.
Turnaround varies by submittal volume, project scope and whether design review applies — simple ADU plans move faster than a hillside addition or new construction that goes through design review. We can't promise a city timeline, but we can promise your drawings won't be the reason for a correction cycle: getting it right on the first submittal is the single biggest lever on total time.
Most Saratoga lots are larger than average for the area, which often gives more flexibility for ADU placement, but hillside parcels can bring slope, grading and access considerations that affect where an ADU can go. State and local rules still set the baseline setback, height and lot-coverage limits. We confirm eligibility and site constraints for your specific parcel during the site walk before we draw anything.
Both, if you want it bundled. We prepare Title 24 / CF1R energy compliance documentation alongside the architectural drawings so the whole package is coordinated and submitted together — see our Title 24 & CF1R services for details.
A site address, rough scope of what you want to build, and — if it exists — a copy of your current property survey or existing floor plan. If you don't have a survey, we can help you get one.
Both. Some clients come to us directly and hire their own contractor afterward; others are referred by a contractor who wants drafting handled by a dedicated specialist rather than in-house.
Tell us what you're building and we'll get back to you with next steps — usually within one business day.
(408) 634-6655
Yuna Drafting
